Rotary Vacuum Pump
HOME > Product Rotary Vacuum Pump > Rotary Vacuum Pump
Rotary Vacuum Pump 
| Type | Middle vacuum ・30L | |
|---|---|---|
| Model | RPV06A-□□ | |
| No. of cylinders | Twin | |
| Cylinder layout | In-line twin | |
| Effective pumping speed (L/min) (50Hz) |
30.0 | |
| Final vacuum (Pa abs) (50Hz) |
≦350 | |
| Final vacuum (kPa G) (50Hz) |
≦-100.95 |
| Type | Low vacuum ・60L | Low vacuum ・90L | Low vacuum ・120L | |
|---|---|---|---|---|
| Model | RPV062-□□ | RPV063-90T200 | RPV064-120V200 | |
| No. of cylinders | Twin | Triple | Quad | |
| Cylinder layout | Parallel | |||
| Effective pumping speed (L/min) (50Hz) |
60.0 | 90.0 | 120.0 | |
| Final vacuum (Pa abs) (50Hz) |
≦3,500 | |||
| Final vacuum (kPa G) (50Hz) |
≦-97.8 | |||
■RPV06A
| Fitting size (mm) | Thread size | ||
| Vacuum port | ø10, ø12, ø16 | G3/8 | |
| Exhaust port | ø10, ø12 | G1/4 |
■RPV062, RPV063
| Fitting size (mm) | Thread size | ||
| Vacuum port | ø10, ø12, ø16 | G1/2 | |
| Exhaust port | ø10, ø12, ø16 | G3/8 |
■RPV064
| Fitting size (mm) | Thread size | ||
| Vacuum port | ø12, ø16 | G1/2 | |
| Exhaust port | ø12, ø16 | G3/8 |
- Details
Rotary vacuum pump with low noise operation, low vibration and high efficiency
The paralleling quadruplet, low vacuum and 120 litter type is newly introduced.
- Corresponding to energy savingPumping speed per wattage (power consumption) 1W is top level in the industry. --> 1.0/1.2"L/min.)(pumping speed )/W (motor power)" (50/60Hz)
- Light weight and compactSpecially designed rotor makes space saving possible.
- Low noise operation and low vibration are realized.Low noise operation and low vibration are realized by balanced design on rotary units.
- Low heat generationLow heat generation is realized by incorporated forced air cooling system on pump.
No rotating seal structure by magnet coupling minimizes slide section. Thus, there is no heat generation by the seal.
- Long service lifeAdaption of super engineering plastic which has self-lubricating and abrasion characteristics and special surface treatment improved durability.
Steady imperceptible clearance between cylinder and rotor is established and they contribute to contactless design and minimized sliding section.
Applying magnet coupling drive requires no rotating seal. Thus, no need to worry about maintenance caused by seal abrasion and minimal load to motor axis helps long service life of motor
- Low generation of dust Lubrication is unnecessary by adoption of the excellent clean vacuum grease for low dust and low volatile.
Low dust is realized by minimizing the sliding parts. Control of environmental pollution by abrasion powder.
- Environmental correspondence and safety designCorrespondence to RoHS and CE marking.
鲁蛇终於交了可爱女友,结果.....
- Variety of optionsNot only a pump but also several kinds of push-in fittings and exhaust cleaners (exhaust mufflers) are prepared.
- For a pump with a built-in power switch model, just plug-in the power plug in to 100VAC outlet to operate the pump.The single phase 100VAC pump with a built-in power switch is introduced.
